Biogas fermentation auxiliaries Biogas During the fermentation process, if it is not properly managed, it will produce various problems, such as slow gas production efficiency, insufficient gas production, or crusting, so the use of biogas fermentation auxiliaries such as G Improve gas production, simple and convenient operation. This is inseparable from the unique role of biogas fermentation auxiliaries. Gumbio biogas fermentation auxiliaries contain the nutrients and trace elements required for the growth and propagation of methanogens, and the use of trace elements therein can effectively stimulate methanogens and promote their rapid propagation. At the same time, improve the activity of enzymes and speed up the reaction of enzymes, accelerate the degradation and decomposition process of macromolecule compounds such as cellulose, use the nutrients added in the product to reproduce the necessary nutrients, and better enable the growth of bacteria species; The adsorbent increases the contact area between the bacteria and the raw materials, and at the same time uses the heat of adsorption to increase the temperature of the methanogens, increase the heat, and facilitate the rapid gas production in the biogas digesters.
The dosage is calculated by adding 200-250 grams of biogas fermentation aid per cubic meter of digester. The basic amount of fermentation tanks with a volume of 4 cubic meters, 6 cubic meters, 8 cubic meters, and 10 cubic meters is roughly 2 bags, 3 bags, 4 bags and 5 bags. Note that when the new pool is in use, mix the raw materials and Gambo Biogas Fermentation Aid uniformly into the pool; when the old pool is in use, remove the biogas slurry from the discharge port to flush the Gum Biogas fermentation aid from the feed inlet into the pool. Repeat several times to try to mix evenly. The new pool can reduce the start-up time by more than half, and the old pool can greatly increase the gas production and gas production rate. Under normal circumstances, the material in the tank can quickly produce gas by adding the fermentation auxiliaries. If there is no increase or little change in the production gas within one week after adding the fermentation auxiliaries, you can first check whether the mixture of the fermentation auxiliaries is even and can be repeatedly injected into the material inlet. Into the biogas slurry, to ensure that evenly mixed into the pool of materials; Second, check for leaks, and take appropriate measures to plug.
The dosage is calculated by adding 200-250 grams of biogas fermentation aid per cubic meter of digester. The basic amount of fermentation tanks with a volume of 4 cubic meters, 6 cubic meters, 8 cubic meters, and 10 cubic meters is roughly 2 bags, 3 bags, 4 bags and 5 bags. Note that when the new pool is in use, mix the raw materials and Gambo Biogas Fermentation Aid uniformly into the pool; when the old pool is in use, remove the biogas slurry from the discharge port to flush the Gum Biogas fermentation aid from the feed inlet into the pool. Repeat several times to try to mix evenly. The new pool can reduce the start-up time by more than half, and the old pool can greatly increase the gas production and gas production rate. Under normal circumstances, the material in the tank can quickly produce gas by adding the fermentation auxiliaries. If there is no increase or little change in the production gas within one week after adding the fermentation auxiliaries, you can first check whether the mixture of the fermentation auxiliaries is even and can be repeatedly injected into the material inlet. Into the biogas slurry, to ensure that evenly mixed into the pool of materials; Second, check for leaks, and take appropriate measures to plug.
Scalpel Blades,Surgical Blade,Safety Scalpel,Surgery Blade
Surgimed Medical Supplies Co.,Ltd , https://www.surgimedcn.com