1. Use a cleaning agent to remove dust and oil on the surface, drain the engine oil and cooling water, remove the diesel tank and the diesel filter at the same time, clean it, wash it, and put it back in place. Fill the tank with diesel oil to prevent fuel tanks from being generated. rust. 2. Carefully clean the crankcase, oil filter and internal parts of the gears, remove the air filter core and brush its dust with a soft brush, then heat the clean oil (evaporate moisture and sediment impurities), and add oil to the oil pan after cooling ( Add to the dipstick two lines, open the decompression, slowly turn the crankshaft, so that the oil is full of the friction surface of the parts. 3, a little dehydration oil into the intake pipe, crankshaft rotation, so that oil adheres to the piston, piston rings, cylinders and valves, and the piston to the compression of the top dead center, so that the valve spring can not pressure. 4. Use oil paper to wrap the air filter, exhaust nozzle, water tank mouth, and water inlet pipe. Use a plastic sheet to wrap the entire diesel engine and lift it into the room. Place the house where the machine is placed so that it cannot be wet, place hard objects under the fuselage, and do not mix it with chemical fertilizers, pesticides, and firewood. Adhere to start 1-2 times per month, each time 1-2 minutes, so that the oil can fill all parts. In short, the long-term unused diesel engines need to be maintained in addition to serious maintenance. They must also have six characters: into (into the room), clean (clean), row (mainframe, matching equipment in order), coating (oil, paint), pad (pad flat), loose (relax spring).
. Pelvis
Pelvis,Skeleton Bones ,The Skeletal System ,Human Anatomy Bones
Body Beauty Equipment Co., Ltd. , http://www.teaching-apparatus.com