If the belt conveyor is broken, we can fix it in a different way. What is the specific method? Then we will introduce the repair method in detail, we understand the method. I will know how to deal with it when there is a problem in the future. Let me explain it to you in detail.
The rubber repair fluid is very effective in repairing the longitudinally torn rubber steel core strip, but it cannot be used as a binder. When the surface of the conveyor belt is partially damaged at a diameter not greater than 1/5 of the bandwidth, the conveyor belt still has sufficient overall strength, and the repair fluid can be repaired without leakage.
The repair process is divided into three steps: surface treatment. The purpose of the surface treatment is to better bond the repair agent to the conveyor belt skeleton. Grinding the crack into a 60-90 degree groove and clearing the surface is the key to successful repair. According to the damage condition, the operation should be cut into different cutting edges. It is best to use a grinding wheel to polish and clean with a cleaning solution (such as acetone).
The repair solution can be repaired without leaking, so the method is relatively simple, we can do this in the future, ready to repair the solution.