1. Before starting: (1) Check the screen for damage and loosen it and replace it in time.
(2) Whether the fasteners are loose and tightened
2. At startup: (1) Pay attention to the presence or absence of abnormal noise
(2) Whether the three-phase current and the three-phase voltage are balanced
(3) Whether the vibration is abnormal
3. After application: clearing and cleansing after each application
At the beginning of the operation, check the anchor bolts at least once a day to avoid loosening. After regular inspection, the screen should be cleaned to get the best filtering effect. When cleaning the screen, it can be stopped without stopping. According to the different properties of the filter materials, the corresponding cleaning is adopted. Agent. If the mud can be washed with water, it is strictly forbidden to touch the hard object with a sharp object.
Note: It is strictly forbidden to wash the motor with water to prevent leakage when cleaning. If it is not used, please cut off the power supply. The dust of the vibration motor should be cleared in time to facilitate the heat dissipation of the vertical vibration motor.
Regular maintenance: Regular inspection of fine mesh and spring for fatigue and damage, whether the fuselage part can be damaged by vibration, vibrating screen machine operation for the first month, application of force arm, long wrench, fastening foot screw device bolts After two times, it should be inspected at least once a month, and the vibration motor should be inspected: the vibration motor, cable and connection installation should be stopped at least once every quarter.
The inspection method is as follows:
caveat! Cut and lock the power supply and give a warning sign before checking
The vibration motor should be switched off and locked and a warning sign should be given
Check the end cap for cracks and whether the end cap screws are unscrewed
Inspect the cable for damage, including cuts and wear, and replace it if it is damaged.
Check the grounding condition to ensure that the grounding resistance of the vibration motor housing does not exceed 0.1 ohms; ensure that the screw tightening torque on the grounding end meets the specified requirements; ensure that all coupling nut tightening torques on the terminal board meet the specified requirements; Too tight.
The main application industries of food vibrating screen are glucose powder, wheat starch, flour, yeast powder, rice flour, skim milk, soy sauce, salt, pollen, tofu, sweetener, rice bran, instant soup powder, powdered sugar, coarse sugar, fresh orange juice. , corn starch, pineapple juice, animal and plant gum, etc.