The hot summer temperatures are high, and tractors often suffer from various faults due to high temperatures during use. If farmers and herdsmen can pay attention to the following points during use, they can effectively reduce the occurrence of faults.
First, cooling explosion-proof tire
Summer temperatures are high, and tire rubber tends to age. In severe cases, a puncture occurs. Therefore, the tractor must check the tire pressure at any time while driving. When the tire is overheated and the air pressure is too high, the vehicle should be parked in a cool place to cool down, but cold water can't be used for flushing, otherwise it will lead to puncture on the way.
Second, cooling and air resistance
In summer, the temperature is high. Because of the high engine speed and heat dissipation, the engine is prone to air resistance, making it difficult for the engine to stop for a few minutes. Once air resistance occurs, the driver should immediately stop cooling and troubleshoot.
Third, prevent water shortage
When driving in hot weather, always pay attention to check the amount of cooling water, pay attention to the water temperature table. When you are short of water, immediately run at idle speed, add water after cooling, and be careful not to immediately open the radiator cover to prevent it from being burned.
Fourth, oil anti-degeneration
Lubricants are susceptible to heat thinning, resulting in deterioration of oxidation resistance, perishability, and even failures such as burning of the shaft and holding the shaft. Therefore, the crankcase and the gear box should be replaced with summer lubricants, and the quantity of oil and the oil quality should be checked frequently and replaced in time.
In addition, the external oil pollution of the engine oil engine must be cleaned in a timely manner. If it is too thick, it will affect heat dissipation, and it will cause hidden troubles for various parts and components. It can use high-pressure injection methods to clean engine parts with non-corrosive cleaners. A new one.
Disposable Medical PVC External Suction Connecting Tube with Yankauer Handle
Material: PVC Plastic
Catheter Material:Medical grade PP material
Size:1.8m,2.5m,3m,3.6m
Color: Transparent or frosted
Cap:with or without cap
Type of tip:Crown tip or plain tip
Type of connector:Standard connector/Cut to fit connector
Type of handle: With or without finger control
Sterile:EO sterilized or non-sterilized
Package: Individual package or bulk package
Sunction Connection Tube,External Suction Connecting Tube,PVC Suction Connecting Tube,Medical Suction Connecting Tube
Luck Medical Consumables Co.,LIMITED , https://www.luckmedical.com