Precautions for film heat shrink packaging machine:
1. When the machine starts working, the heating knife row must be preheated. During the period, the value of the temperature meter can be read to a predetermined value before starting work.
2, the machine must be reliably grounded to ensure the safety of life; the temperature control instrument on the electrical panel must be low-to-high principle must not be raised once, otherwise burn the electric heating tube and other components.
3, the package should not be lower than 140 mm, otherwise the longitudinal pressure plate will fall and push the cylinder to collide, damage the cylinder; the working environment is clean and free of corrosive gas or dust, so as not to be unfavorable to the machine.
Use introduction:
·Applicable to light industry, food, beverage, tableware, hotel supplies, stationery, arts and crafts, hardware tools, daily necessities, chemical products, etc.;
·Adopt electronic grade transmission, stable and reliable, long life and low noise.
·Using quartz far-infrared tube heating method, it can continuously generate infrared radiation during operation, and with strong wind circulation, the temperature of the heating chamber becomes more uniform and energy is saved.
·The conveying part adopts high-power DC motor, which can carry out stepless speed regulation and high bearing capacity.
· It can work continuously for a long time, and the operation is stable and reliable.
· It adopts special mechanical structure design, which is more beautiful and luxurious, and makes maintenance easier and convenient.
· Any type of shrink film can be perfectly shrink wrapped.
·The lower row of heating tubes are designed with drawers for easy maintenance.
Technical parameters Model: Model 4020 Shrinking furnace size (inside): 800 × 400 × 200mm
Machine power: 5Kw
Carrying capacity: 5kg
Conveying speed: 0-10 m / min Temperature °C: 0-300
Machine weight: 80kg
Dimensions: 1200 × 630 × 750mm
Use voltage: 220V or 380V, 50Hz