Problems to be Noted when Using Dry Spread Fermenting Bed Technology

Problems to be Noted when Using Dry Spread Fermenting Bed Technology

There are four major advantages of the pig-breeding technology in the fermentation bed: no excrement and urine emissions, no pollution, satisfying the pig's living conditions and habits, fundamentally improving the pig's health and vitality, reducing disease, making pigs grow faster, and improving pig production performance. Provincial feed, water, labor and medicine; improve pork quality.

Older fermentation beds are wet technologies and wet technologies have more defects. In view of the problems existing in wet fermentation beds, Beijing Huaxia Kangyuan Science and Technology Co., Ltd. has developed a technology for the development of the Jinbao dry-spreading fermentation bed. Compared with the wet fermentation fermentation bed, the dry-sparing fermentation bed has many advancements, is easy to use, and has a long-term effect.

Although there are many advantages of the Kinpo Dry Fermentation Bed, it is a relatively mature fermentation bed model, but the following three points need to be noted in the application.

First, the litter material is not fermented in advance. Under certain circumstances, gastrointestinal stress will occur due to ingestion of rough litter by pigs, temporarily affecting growth. In particular, thicker sawdust or wood shavings are spread over the top of the litter and the fermentation may not be fed to the ternary crossbred pigs at the start. This may happen.

Solution: The surface litter should be fine when feeding the pig and it is best to ferment it. If the weaned piglets with high lean percentage, such as Yangsanyuan, which is raised in the cement circle, are transferred to the fermentation bed for feeding, it is best to add a little bit of fermented litter in the feed a few days in advance so that the gastrointestinal function of the piglet can be adapted. .

Second, when the fermentation bed has just been laid, the strains are in a dormant state and the winter needs a start-up process.

Third, the newly activated fermentation mattress material surface will be too dry, the pig dust when running, causing respiratory foreign body inflammation. In this case, apply proper moisture on the surface of the litter.

The sow through is our Honde brand of high quality sow raising equipment, made of high quality stainless steel SST 304 and featuring automatic welding technology with a thickness of 1mm to 1.2mm and the robustness of the sow through. The depth of the sow through is moderate, which allows it to contain enough food and avoid food waste. The size of the sow through There are many, to meet different needs, it is very convenient. At the same time, the edge of the sow through is smooth and strong, preventing pigs from being harmed while using it. the sow through makes it easy and convenient for your sow to feed, and sows that have used the sow through grow well.


Art Spec Thickness Material

1231

455*370*230mm 1mm SST 304
1231 455*370*230mm 1.2mm SST 304
1233 530*390*230mm 1.2mm SST 304

Sow Trough

Sow Trough

Sow Trough,Sow Plastic Trough,Plastic Sow Feed Trough,Sow Feeding Trough,Pig Feed Trough

HuangHua FengYi Honde Metal Factory , https://www.farrowingcratesfromchina.com