1. The crusher and power unit should be installed firmly. If the pulverizer is fixed for a long time, it should be fixed on the cement foundation; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron and ensure the pulley of the power machine (diesel or electric motor) and the pulverizer. The slots are in the same plane of revolution.
2. After the pulverizer is installed, check the fastening condition of each fastener. If it is loose, tighten it. Also check that the belt tightness is appropriate.
3. Before starting the pulverizer, first turn the rotor by hand to check whether the teeth, hammer and rotor are running flexibly and reliably. There is no collision in the shell. The direction of rotation of the rotor is consistent with the direction indicated by the machine arrow. Power machine and smash Machine lubrication is good.
4. Do not change the pulleys casually, in case the rotation speed is too high, the explosion chamber will explode, or the rotation speed will be too low, which will affect the working efficiency of the crusher.
5. After the pulverizer starts, it should be idling for 2~3min. After no abnormal phenomenon, it will be fed again.
6, at work should pay attention to the operation of the pulverizer at all times, the feeding should be even, to prevent blocking the car, do not overload the work for a long time. If any vibration, noise, bearing and body temperature are too high, and the material is sprayed outward, stop the machine immediately and check it out.
2. After the pulverizer is installed, check the fastening condition of each fastener. If it is loose, tighten it. Also check that the belt tightness is appropriate.
3. Before starting the pulverizer, first turn the rotor by hand to check whether the teeth, hammer and rotor are running flexibly and reliably. There is no collision in the shell. The direction of rotation of the rotor is consistent with the direction indicated by the machine arrow. Power machine and smash Machine lubrication is good.
4. Do not change the pulleys casually, in case the rotation speed is too high, the explosion chamber will explode, or the rotation speed will be too low, which will affect the working efficiency of the crusher.
5. After the pulverizer starts, it should be idling for 2~3min. After no abnormal phenomenon, it will be fed again.
6, at work should pay attention to the operation of the pulverizer at all times, the feeding should be even, to prevent blocking the car, do not overload the work for a long time. If any vibration, noise, bearing and body temperature are too high, and the material is sprayed outward, stop the machine immediately and check it out.
Ibutamoren What Does It Do,Ibutamoren Before and After,Does Ibutamoren Work
Shaanxi YXchuang Biotechnology Co., Ltd , https://www.peptidenootropic.com