Also known as tunnel oven , mainly for the sterilization, drying and depyrogenation of antibiotic bottles, there are two general forms of tunnel heating sterilization, one is hot air circulation (ie parallel flow of hot air), and the other is far infrared radiation, which is common The points are dry heat sterilization.
The common types are as follows:
1, hot air circulation type tunnel sterilizing dryer <br> <br> hot air circulating dryer tunnel sterilizing S originally evolved through the company's products and the Bosch company B +. Its characteristics: (1) easy to control temperature and hot air pressure difference; (2) uniform temperature distribution; (3) the whole box length is shorter than the far infrared radiation type. However, the imperfections are as follows: (1) Hot air circulation type tunnel sterilization drying adopts high-efficiency filter with high resistance to higher than 350 °C, and its use cost is relatively high; (2) heating up due to hot air circulation type preheating section Faster, there is a certain requirement for the uniformity of the wall of the bottle.
2, two kinds of tunnel sterilizing dryer compare both types sterilizing tunnel drying oven at different characteristics, able to meet pharmaceutical production requirements. In 2000, the sterilization and drying of antibiotic bottles in China was generally selected from the traditional classic far-infrared heat radiation type. This is because of its low price and relatively low operating cost. It is very suitable for molding. bottle. Recently, however, since the antibiotic aseptic preparation uses a large number of controlled bottles, its thin wall and uniformity characteristics, combined with the control of the hot air circulation type and the uniformity of heat, make the hot air circulation type tunnel sterilization dryer widely used. It is also the first of its kind today.
3, the far-infrared radiation-type tunnel sterilizing dryer <br> <br> far-infrared radiation-type tunnel sterilizing dryer in a sense, is a native of domestic products, but also learn from Calumatic company and company evolution and IMA Come.
Pain Relief Patch for Breast
[Name] Medical Cold Patch
[Package Dimension] 10 round pieces
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for breast hyperplasia, breast fibroids, mastitis, breast agglomera tion, swollen pain.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.
Pain Relief Patch For Breast,Pain Relief Plaster For Breast,Relief For Breast Pain,Pad Relief Patch For Breast
Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xijieyitongpatches.com