Motorized rice transplanter (with Dongfeng-2S as an example)
1 Number of plants per hole and spacing between plants. Adjust the position of the curtain and change the depth of the curtain. The deeper the curtain, the more the number of plants; on the contrary, it is less. Generally, the curtain is adjusted to be flush with the brush tip, and the distance from the brush tip is no more than 3 mm. After the machine is shut down, the position of the shifting handle is rotated, and the handle is at the 4 or 6 position, which indicates that the spacing between the plants is 4 inches and 6 inches, and the gear adjustment distance can also be changed to 3 inches and 5 inches.
2 The positioning time of the jaws and the feeder is adjusted. Turn the sub-insert wheel by hand. When the pawl enters the jaw and the squeegee is in a horizontal position, the jaw of the squeegee has retreated. The distance between the jaw tip and the root of the brush is required to be 14 to 24 mm. The adjustment method is to move the position of the plug-in transmission chain forward and backward.
3 Transplanting depth. Change the fixed position of the lift lever on the depth adjustment tooth plate. The fixed position is high and deep; if not, it is shallow.
4 chain tightness and engine belt tightness. The tightness of the chain is suitable to be slightly elastic under the pressure in the middle of the chain, which is achieved by adjusting the tight wheel. Before and after the production of the mobile engine, the belt does not slip. (Zhu Tianbao)
Small Starch Separator Machine
Small Starch Separator Machine,Industrial Starch Production,Starch Separator Machine,Starch Vibration Separator Machine
Shuangfeng County Dingyuan Machinery Manufacturing Co. Ltd.. , https://www.separators.pl